|
NEW GENERATION
SOLENOID WINCH CONTROL
$139
FREE
DELIVERY AUSTRALIA WIDE
PRICES
BELOW
RING
0447064152 OR 0397270989
FOR CREDIT CARD PURCHASES
BEST PRICE IN AUSTRALIA
12Volt Heavy duty
Winch Solenoid
NOTE!
YOU ONLY NEED ONE
OF THESE! This one solenoid controls your
winch in BOTH directions
Fully Waterproof
Will out perform
and outlast your standard solenoids
Easy
connection wiring diagram with pictures supplied by email or
click below link
http://www.tigerz11.com.au/wiringup.htm
Suitable for all
winches up to 12000lb
A quality solenoid
that will free you from problems associated with the cheaper solenoids supplied
standard with electric winches
Winch Control Box
AVAILABLE IN 12V AND 24V
Solenoid - Winch Control
The revolution in winch control is here, single solenoid operation of any winch
that uses solenoids to operate it.
Get rid of those unreliable solenoids.
These waterproof contactors give your winch unsurpassed operation and
reliability.
These are a must for all electric winch owners.
ROBUST - WATER RESISTANT - RELIABLE
Suitable for use with
WARN - OX - PREMIER - RUNVA - MILE MARKER - ARB - TJM
and any winch that uses solenoids to operate it.
T he new solenoid has a
longer life, and the featuring advantage is no more
arcing when the current is
switched, while arcing is the leading cause for
the failure or poor performance of the previous solenoids.
The black box replaces
the solenoid pack you would have
with your electric
winch, no matter what brand. No more solenoids
that can burn out. This
solid state unit will not burn out and
will outlast your
winch. You completely remove the winch control
box with all the
internals.
It will run any
electric winch.
It is very easy to wire
your hand controller to this or even
wire up your own dash
board mounted in/out switch. Mount this
unit inside the engine
bay somewhere. You only need the one unit.
The competition boys
run this unit so they no longer have
to fear solenoids
burning out.
SPECS OF NEW
TIGERZ11 SOLENOID:
CONTINUOUS RATING: 200A
CONTACT ARRANGEMENT: 2 PDT
POWER CONSUMPTION 16 W
CONTACT MATERIAL AgCdO
CONTACT RATING (AT RESISTIVE LOAD ): 200A
48VDC 200A 250VAC
MAX. SWITCHING VOLTAGE: 60VDC, 250 VAC
OVER CARRY THE ELECTRIC CURRENT ( 7Ie/10S)
1400A/ 10S
RATED COIL VOLT: 12VDC, 24VDC, 26VDC, 48VDC,
60VDC
OPERATING VOLT IN COLD STATE AT 20+/-5"C:(VDC)
PICKUP MAX: 70% RATED VOLT
RELEASE: 5%-30% RATED VOLT
CONTACT RESISTANCE: MAX. 50 MQ (INTIAL)
INSULATION RESISTANCE: MIN. 100MQ AT 500VDC
PUNCTURE (VOLT) STRENGTH: 1500VAC 50 HZ/60 HZ
( 1 Minute)
OPERATE TIME: MAX. 50 mSEC.
RELEASE TIME: MAX. 50 mSEC
VIBRATION FREQ. AT THE FIXED POSITION: 3g,
1-50HZ (FREP. 1- 10 HZ, AMPL. 25/F2 FREP.10-50HZ, AMPL.250/F2)
ELECTRIC LIFE: 50000 CYCLES.
MECHANICAL LIFE: 100000 CYCLES.
| 
